Order Product Literature and Samples
WeatherBond PRO PVC Accessories
WeatherBond PRO PVC Flashing
is an 80-mil non-reinforced thermoplastic polyvinyl chloride based membrane used for field fabricated pipe flashings, sealant pockets and scuppers when the use of a pre-molded accessory is not feasible. PVC Flashing is available in 12" and 24" widths.
PVC Molded Pipe Seals
are injection molded, pre-formed, universal pipe seals that fit over any cylindrical pipe from 1"-6" in diameter.
Split Pipe Seals
are fabricated flashings made of 60-mil reinforced WeatherBond PRO PVC membrane. Split (cut) and overlap tabs allow the pipe seals to be opened and wrapped around a round pipe with an obstruction. 1" to 6" sizes are available.
PVC Overlayment Strip
is an 80-mil non-reinforced WeatherBond PRO PVC membrane used for overlaying rows of fasteners and plates or stripping in PVC Coated Metal roof edging. PVC Overlayment Strip is available in 6" x 100' rolls.
is used to terminate membrane on a vertical surface including on a parapet wall or over the roof edge. Termination Bar is available in 10' lengths.
Molded Sealant Pockets
consist of an interlocking, two-piece, injection molded flexible pocket with a rigid polypropylene vertical wall and preformed deck flanges. Used with pourable sealant and primer, this product effectively waterproofs pipe clusters or other odd shaped penetrations.
Square Tubing Wraps
are made of white 60-mil reinforced WeatherBond PRO PVC membrane. A split and overlap tab are incorporated into the wrap to allow the flashign to be opened and wrapped around a square penetration with no obstruction. Available in 3" to 6" sizes.
Inside and Outside Corners
are pre-formed pieces used to finish corner details. Installation is fast and easy with no stretching or cutting required.
are Injection molded flashing used to seal T-joint intersections on 60--mil and thicker PVC membranes.
P.O. Box 251
Plainfield, PA 17081