WeatherBond RBR EPDM Adhesives and Sealants


WeatherBond RBR LC-60 Bonding Adhesive is a high-strength, solvent-based contact adhesive that allows quick bonding of cured flashings and membranes to various substrates. This adhesive is specially formulated for application with a ½" (13 mm) medium nap roller.  Coverage Rate:  60 square feet/gallon

Low VOC Bonding Adhesive
is a high-strength, solvent-based contact adhesive used to bond WeatherBond EPDM and TPO membranes to various porous and non-porous substrates.  This product also meets the <250 gpl VOC Content requirements of the OTC Model Rule for SIngle-Ply Roofing Adhesives.  Coverage Rate:  60 square feet/gallon
1168 Low VOC Bonding Adhesive is a high-strength, solvent-based contact adhesive used to bond WeatherBond EPDM and TPO membranes to various porous and non-porous substrates.  This product also meets the <250 gpl VOC Content requirements of the OTC Model Rule for Single-Ply Roofing Adhesives.  Coverage Rate:  60 square feet/gallon
WeatherBond RBR Acrylic Water Based Bonding Adhesive is a unique synthetic bonding adhesive that exhibits excellent adhesion to WeatherBond RBR EPDM Membrane.  Coverage Rate:  100-120 square feet/gallon
Multipurpose Primer is a solvent-based product designed for one-step cleaning and priming of surfaces prior to the application of Seam Tape and all other pressure-sensitive products.  Coverage Rate:  3" x 300 linear feet/gallon

Low VOC EPDM Primer
is designed to prepare EPDM membrane surfaces prior to the application of peel & stick products.  Coverage Rate:  Dusty membrane - approximately 250 square feet/gallon.  Clean membrane - up to 700 square feet/gallon 
Weathered Membrane Cleaner is used to clean in-service membrane that has been exposed to the weather. It helps to loosen and remove dirt and other contaminants from the surface of the membrane and leaves a suitable surface for seaming and the subsequent application of Primer.  Coverage Rate:  400 square feet/gallon
One-Part Pourable Sealer is a single-component, moisture-curing, elastomeric polyether sealant that is compatible with WeatherBond RBR EPDM membranes. The material is designed to provide a flexible, durable and long-lasting seal around hard-to-flash penetrations in EPDM Roofing Systems.  Coverage Rate:  .23 gallons per 6" pocket
WeatherBond RBR Lap Sealant is a heavy-bodied gun consistency material used in conjunction with roofing system materials. Its primary use is to seal the exposed edges of EPDM membrane splices. Lap Sealant is extremely durable. The cured rubber consistency enables it to expand and contract with the membrane. WeatherBond RBR Lap Sealant is to be used to seal splice edges of cured EPDM, uncured EPDM Flashing, T-Joint Patches, Inside/Outside Corners, etc. Coverage Rate:  22 linear feet/tube
AquaBase 120 Bonding Adhesive is a unique, semi pressure-sensitive water-based bonding adhesive for WeatherBond membranes offering superior peel strengths without V.O.C.'s or strong odors.   Coverage Rate:  100 to 120 square feet per gallon when used as a contact adhesive and applied to both the substrate and membrane.
 WeatherBond Water Cut-Off Mastic is a one-component, low viscosity, self-wetting butyl blend mastic used with roofing and waterproofing systems. It is primarily used as a sealing agent and also used when membrane is being terminated using a compression-type seal.  Coverage Rate:  10 feet per tube 
Universal Single Ply Sealant is a 100% solids, solvent free, one part, polyether sealant.  Universal Single Ply Sealant can be used as a termination bar sealant for WeatherBond PRO TPO Fully Adhered and Mechanically Attached and WeatherBond RBR Fully Adhered Systems.  Coverage Rate:  25 feet per tube using a 3" bead
Stay Connected
Contact WeatherBond
  • Email WeatherBond
  •  
  • P.O. Box 251
  • Plainfield, PA 17081
  •  
  • TEL: 866.471.5125
  • FAX: 717.960.4034