WeatherBond RBR EPDM Accessories


WeatherBond RBR Peel & Stick Seam Tape is a two-sided, cured EPDM/Butyl based polymer adhesive that offers uniform width and adhesive thickness and is manufactured using a clear poly film for application ease. WeatherBond RBR Peel & Stick Seam Tape delivers 30% greater peel strength and 32% greater shear strength when compared to other tapes available in today's marketplace. Designed for use with WeatherBond RBR EPDM Fully-Adhered Roofing Systems.
Peel & Stick Cover Strip is available in 6"-, 9"- and 12"-wide x 100'-long rolls.  WeatherBond RBR Peel & Stick Cover Strip is ideal for stripping in metal edging.  Peel & Stick Cover Strip provides installation speed and labor-savings in field applications. The Cover Strip is a nominal 75-mils thick, consisting of a black fully-cured EPDM membrane laminated to a fully cured synthetic rubber, pressure-sensitive adhesive.
WeatherBond RBR Peel & Stick Reinforced Perimeter Strip couples 45-mils (1.14mm) of reinforced EPDM with 35-mils of cured EPDM pressure-sensitive adhesive tape laminated along one or both edges. The reinforced EPDM membrane is 6" wide, and the adhesive strips are 3"-wide. Six-inch wide WeatherBond RBR P&S Reinforced Perimeter Strip can be attached either horizontally or vertically in conjunction with Seam Fastening Plates below the EPDM field membrane for angle change securement.
WeatherBond RBR Peel & Stick Uncured Flashing is an uncured, black EPDM membrane laminated to a fully cured synthetic rubber, pressure-sensitive adhesive. It is available in 6" x 100' and 12" x 50' rolls and is a nominal 95-mils thick. Peel & Stick Uncured Flashing is ideal for field-wrapping large (greater than 6") pipes or penetrations. This flashing provides cost- and labor-savings in field applications. WeatherBond RBR White Peel & Stick Uncured Flashing is also available.
T-Joint Covers are a pre-punched, non-reinforced flashing used to seal "T-joint" intersections on 60--mil and thicker EPDM membranes
WeatherBond RBR Peel & Stick Inside/Outside Corners consist of uncured EPDM Flashing laminated to pressure-sensitive adhesive tape, providing 95-mils of total thickness.
WeatherBond RBR Peel & Stick Pourable Sealer Pocketsconsist of EPDM flashing with an adhesive backing and a 2" support strip pre-applied to the flashing. Sizes can be combined to form larger pockets when required. Pressure-Sensitive Pockets are easy to install and pre-applied adhesive ensures uniform contact with the substrate.
WeatherBond RBR Peel & Stick Pipe Seals are cured, pre-molded EPDM Flashing for pipes up to 6" in diameter and as narrow as 1" in diameter. WeatherBond RBR Peel & Stick Pipe Seals have pre-applied pressure sensitive adhesive tape on the bottom of the deck flange, which affords easy installation and strong membrane bonding. WeatherBond RBR White Peel & Stick Pipe Seals are also available.
WeatherBond Termination Bar is used to terminate membrane on a vertical surface including on a parapet wall or over the roof edge. Termination Bar is available in 10' lengths.
Stay Connected
Contact WeatherBond
  • Email WeatherBond
  •  
  • P.O. Box 251
  • Plainfield, PA 17081
  •  
  • TEL: 866.471.5125
  • FAX: 717.960.4034