Seams:
WFC 2.2 Membrane Seam Using Peel & Stick Seam Tape
WFC-2.3 Peel & Stick Seam Tape Intersection
WFMA-2.2 Membrane Attachment at Tape Splice

Corners:
WFC-15.1(Option1) Inside Corner/Separate Wall Flashing
WFC-15.5 Peel and Stick Inside Corner
WFC-15.1(Option 2) Inside Corner/Separate Wall Flashing
WFC-15.2 Inside Corner/Continuous Wall Flashing
WFC-15.6 Peel & Stick Outside Corner

Edges:
WFC-1.1 Metal Edge Termination
WFC-1.3 Metal Bar Termination

Expansion Joints:
WFC-3.6 Shear/Expansion Cover
WFC-3.7 Deck to Wall Expansion Joint
WFC-3.5 Shear/Expansion Cover

Curb Flashing:
WFC-5.2 Peel & Stick Curb Flashing

Drains:
WFMA-6 Roof Drain with Sump
WFC-6.2 Roof Drain

Pipes:
WFMA-8.1 Vent Pipe Flashing
WFC-8.3 Molded Peel & Stick Pipe Seal
WFMA-8.2 Peel & Stick Vent Pipe Flashing
WFMA-14 Field Fabricated Pipe Seal

Membrane Placement and Attachment:
WFMA-21.1 Membrane Placement and Attachment
WFMA-21.4 Alternate Membrane Attachment with PS Coverstrip
WFMA-21.5 Membrane attachment with PS RUSS

Wall Terminations:
WFC-9.3 Counterflashing Termination
WFC-9.4 Mechanical Termination
WFC-9.5 Coping Stone Termination
WFC-9.8 Counterflashing Termination
WFC-9.9 Metal Coping
WFC-9.2 Cap Flashing Termination
WFC-9.10 Mechanical Termination at Vertical Joint

Roof-To-Wall/Curb Flashing:
WFC-12.1 Parapet/Curb
WFC-12.2 Parapet/Curb (Continuous Membrane)
WFC-12.3 Parapet/Curb with PS RUSS
WFC-12.4 Wall Flashing with PS RUSS

Penetration Pockets:
WFC-16.6 Peel & Stick Pourable Sealer Pocket

Scuppers:
WFC-18.2 Scupper through Deck

Valleys:
WFC-22 Valley

Sleepers:
WFC-24 Sleeper

I-Beam:
WFC-30 I-Beam Penetration

Metal Edges and Gravel Stops:
WFA-1.4 Metal Edge Termination (Adhered)

Insulation Attachment:
WFA-27.4 - 4'X8' Oriented Strand Board (OSB) Attachment
WFA-27.5 Insulation - For Re-Roof/No Tearoff Projects
WFA-27.6 - 1 1/2" Mimimum Polyisocyanurate Attachment
WFA-27.7 - 1/4" or 1/2" Thick Dens-Deck Prime Attachment
WFMA-27.1 Mechanical Attachment Insulation/Underlayment or 1/2" Thick DensDeck
WFMA-27.2 Mechanical Attachement Polyisocyanurate less than 1 1/2" Thick
WFMA-27.3 Foamular, Durapink or Dow Recovermate Attachment
WFA-27.1 Insulation Attachment (4'x4' Insulation)
WFA-27.2 Insulation Attachment (4'x8' Insulation)
WFA-27.3 Minimum 2" Polyisocyanurate Insulation

Roof Drain Sump:
WFA-6 Roof Drain Sump

Grid Nailer:
WFA-7 Optional Grid Nailer

Vents:
WFA-14 One-Way Air Pressure Relief Vent

Ridges:
WFMA-22.1 Ridge Membrane Attachment
WFMA-22.2 Ridge Membrane Attachment