Other Products and Accessories

Other Products & Accessories

WeatherBond offers a wide variety of prefabricated roofing accessories that make installations quicker and easier. These accessories save time and money during installation and help to maintain the watertight integrity of the roofing system.

Membrane Types

Fasteners & Plates

Weatherbond HPW Fastener

HPW Fastener

Applicable to steel, 22-gauge and heavier, CDX plywood and wood plank deck types. Can be used to secure EPDM reinforced membranes, RPS and for insulation securement. Longer fastener sizes available as special order.

Sizes Available:

  • 1 1/4″, 2″– 15″ (1″ Increments)

Size & Quantity Per Box:

  • 1 1/4″, 2″– 6″: 1,000
  • 7″– 12″: 500
  • 13″– 15″: 250;
Weatherbond HPWX Fastenerq

HPWX Fastener

A #15 diameter fastener applicable to steel, wood and CDX plywood. Can be used to secure EPDM, TPO and PVC membranes.

Sizes Available:

  • 2″– 12″ (1″ Increments)
  • 14″– 16″ (2″ Increments)

Size & Quantity Per Box:

  • 2″– 4″: 1,000
  • 5″– 12″: 500
  • 14″– 16″: 250
Weatherbond insulation Fastener

Insulation Fastener

Applicable for EPDM, PVC, and TPO mechanically attached and fully adhered roofing systems. Compatible with wood (minimum 1532” [12 mm] CDX plywood) and steel decks (22-gauge [0.76 mm] or heavier).

Sizes Available:

  • 5/8″, 2″– 8″ (1″ Increments)

Size & Quantity Per Box:

  • 2″– 8″: 1,000
Weatherbond Retrodriller Fastener

Retrodriller Fastener

A specially designed fastener with a 1/2″ drill point used for attaching EPDM, TPO, and PVC membranes to structural steel purlins (up to 316“) in standing seam metal roof retrofit applications.

Sizes Available:

  • 4″, 5″, 6″, 8″ & 10″

Quantity Per Box:

  • 500
Metal Membrane Plate

Seam Fastening Plate

Applicable with HPW fasteners used for additional membrane securement of reinforced or non-reinforced membranes.

Sizes Available:

  • 2″ dia.

Quantity Per Box:

  • 1,000
Insulation Fastening Plate

Insulation Fastening Plate

Applicable with insulation screws, HPW and CD-10 fasteners. Used for insulation securement only on steel, wood and concrete decks.

Sizes Available:

  • 3″ dia.

Quantity Per Box:

  • 1,000
HPWX Plate

HPWX Plate

Along with the appropriate fastener, used to secure TPO and PVC membranes to steel, concrete and wood decks.

Sizes Available:

  • 3/8” dia.

Quantity Per Box:

  • 1,000

Adhesives & Sealants

Weatherbond LC 60 Bonding Adhesive

LC-60 Bonding Adhesive

A high-strength, solvent-based contact adhesive that allows quick bonding of cured flashings and membranes to various substrates. LC-60 Bonding Adhesive is designed for bonding EPDM (black and white) non-reinforced or reinforced membranes to approved substrates. LC-60 Bonding Adhesive is yellow in color.

Coverage Rate: 60 square feet per gallon finished surface.

Packaging:

  • 5-gal pail – Product Number: 302036
  • 1-gal can – Product Number: 302037

Shelf Life: 12 months

TPO Bonding Adhesive

TPO Bonding Adhesive

A high-strength, solvent-based contact adhesive that allows bonding of TPO membrane to various porous and non-porous substrates.

Coverage Rate: 60 square feet per gallon finished surface.

Packaging:

  • 5-gal pail – Product Number: 309831

Shelf Life: 12 months

Low VOC Bonding Adhesive

Low-VOC Bonding Adhesive & Low-VOC Bonding Adhesive 1168 (EPDM & TPO)

A high-strength, solvent-based contact adhesive that allows bonding of all EPDM and TPO membrane to various porous and non-porous substrates. Low-VOC Bonding Adhesive meets the <250 gpl VOC content requirements of the OTC Model Rule for Single-Ply Roofing Adhesives. Low-VOC Bonding Adhesive 1168 meets the requirements for SCAQMD regulations.

Low-VOC Bonding Adhesive 1168 also available (not shown)

California-compliant Low-VOC Bonding Adhesive.

Coverage Rate: 60 square feet per gallon.

Packaging:

  • 5-gal pail – Product Number: 318847

Shelf Life: 12 months

Low-VOC PVC Bonding Adhesive

Low-VOC PVC Bonding Adhesive

A high-strength, solvent-based contact adhesive that allows bonding of PVC and KEE-enhanced PVC membrane to various porous and non-porous substrates. This product also meets the <250 gpl VOC content requirements of the OTC Model Rule for Single-Ply roofing adhesives.

Coverage Rate: 60 square feet per gallon finished surface.

Packaging:

  • 5-gal pail – Product Number: 309126

Shelf Life: 12 months

PVC HydroBond Water-based Adhesive

PVC HydroBond Water-Based Adhesive

A water-based, wet lay-in, one-sided dispersion adhesive that is used to secure PVC membranes to a variety of substrates.  Complies with the California Clean Air Act of 1988 (updated in 1997) and California Air Quality Control District’s listing of VOC limitations. Meets the requirements of the OTC Model Rule for Single- Ply Roofing Adhesives. Cannot be used with KEE HP smooth-backed membrane.

Coverage Rate:
Smooth-backed membrane:

  • Roller application – 100 square feet per gallon of finished surface.
  • Spray application – 133 square feet per gallon of finished surface.

Fleece membrane:

  • Roller application – 100 square feet per gallon over polyiso,
  • DensDeck, DensDeck Prime, SECUROCK, and plywood. Spray application – 100 square feet per gallon over DensDeck and 133 square feet per gallon over polyiso, DensDeck Prime/SECUROCK, and plywood.

Packaging:

  • 5-gal pail – Product Number: 322112

Shelf Life: 12 months

Dash/Xpand Adhesive

DASH Adhesive

A low-rise, two-component, insulating polyurethane adhesive. It can be used to adhere a variety of insulations and membranes. Can be applied in full spray or beads.

Coverage Rate: See TDB

Packaging:

  • 15-gal drum – Part A – Product Number: 327583
  • 15-gal drum – Part B – Product Number: 327587
Aqua Base 120

Aqua Base 120

A semi-pressure-sensitive water-based adhesive. This product may be used as a two-sided contact adhesive with EPDM and TPO membranes.

Coverage Rate: 120 square feet per gallon finished surface. (May vary due to conditions such as insulation type or wall construction.)

Packaging:

  • 5-gal pail – Product Number: 307431

Shelf Life: 12 months

Solvent-Free Bonding Adhesive

Solvent-Free EPDM Bonding Adhesive

A high-strength, low-odor, polymer-based adhesive that allows fast installation of EPDM membranes and cured flashings to various substrates. This adhesive is specially designed for installing WeatherBond (black and white) non-reinforced EPDM membranes.

Coverage Rate: 100 square feet per gallon.

Packaging:

  • 5-gal pail – Product Number: 318127

Shelf Life: 6 months

Dash/Xpand Dual Tank

DASH Dual Tank

A two-component, construction-grade, lowrise polyurethane adhesive designed for bonding WeatherBond’s Fleece membranes and/or insulation to various substrates. Applied in spatter spray or beads. Part A box includes 8 nozzle tips, gun, and 25’ hose.

Coverage Rate: See Product Data Sheet.

Packaging:

  • Dual Tank – Part A – Product Number: 325445
  • Dual Tank – Part B – Product Number: 325664

Shelf Life: 12 months (Part A and Part B)

Acrylic Water-Based Bonding Adhesive

Acrylic Water-Based Bonding Adhesive

A unique synthetic bonding adhesive specifically formulated to replace comparable solvent-based adhesives in the RV, Modular and Commercial Roofing industries. It exhibits excellent adhesion to EPDM membrane.

Coverage Rate: Approximately 100-120 sq. ft./gallon.

Packaging:

  • 3.5-gal pail – Product Number: 310365

Shelf Life: 12 months in unopened container when stored at temperatures between 50°F and 90°F.

Cold Applied Adhesive

Cold-Applied Adhesive

An asphalt-modified polyether, one-sided, wet lay-in adhesive designed to adhere to fleece AC membranes and WeatherBond’s modified base sheet.

Coverage Rate: 67 square feet per gallon for finished or smooth surfaces. 50 square feet per gallon of finished surface for uneven surfaces.

Packaging:

  • 5-gal pail – Product Number: 319689

Shelf Life: 9 months when stored below 90°F

EPDM X-23 Low-VOC Bonding Adhesive

EPDM X-23 Low-VOC Bonding Adhesive

A high-strength, solvent-based contact adhesive that bonds EPDM membranes to various porous and non-porous substrates. This product meets the <250 gpl VOC content requirements of the OTC Model Rule for Single-Ply Roofing Adhesives.

Coverage Rate: 60 square feet per gallon of finished surface.

Packaging:

  • 5-gal pail – Product Number: 324002

Shelf Life: 12 months

Weatherbond CAV GRIP

CAV-GRIP

CAV-GRIP is a multi-purpose contact adhesive/primer recommended for enhancing the bond of WeatherBond’s 725TR Air and Vapor Barrier. CAV-GRIP can also be used as a primer for unexposed asphalt.

Coverage Rate: 50-55 square feet per lb, 2,000-2,500 square feet per cylinder for 725TR or priming unexposed asphalt.

Packaging:

  • 40-lb aerosol cylinder – Product Number: 305432

Shelf Life: 12 months unopened container

Weatherbond TPO Primer

TPO Primer

A high-solids, clear polymer-based primer used to prepare TPO membrane prior to the application of TPO pressure-sensitive products.

Coverage Rate: 200 – 250 square feet (one surface) per gallon.

Packaging:

  • (6) 1-gal cans – Product Number: 310471

Shelf Life: 12 months unopened can

Weatherbond Low-VOC Primer

Low-VOC Primer

Designed for one-step cleaning and priming of EPDM and TPO surfaces prior to the application of P&S and pressure-sensitive products. It is a Low-VOC product that is ideal for use where environmental issues are a concern.

Coverage Rate: As high as 700 square feet per gallon with TPO or no dust EPDM membrane. Approx. 250 square feet per gallon with dusted EPDM membrane.

Packaging:

  • (6) 1-gal cans – Product Number: 316522
  • (8) 1-quart cans – Product Number: 319889

Shelf Life: 9 months

Weatherbond Multipurpose Primer

Multi-Purpose Primer

A solvent-based product designed for cleaning and priming EPDM membranes prior to the application of P&S products.

Coverage Rate: As high as 450 square feet per gallon with clean EPDM membrane. Approx. 250 square feet per gallon with standard membrane.

Packaging:

  • (6) 1-gal cans – Product Number: 309510
  • (8) 1-quart cans – Product Number: 310382

Shelf Life: 9 months

CCW-702 and CCW 702LV Primer

CCW-702 & CCW-702LV Primers

Solvent-based, high-tack adhesives specifically designed to promote maximum adhesion of WeatherBond 725TR Air and Vapor Barrier to approved substrates. They are also used as a surface prep to promote adhesion with DASH Adhesive.

Coverage Rate: 300-350 square feet per gallon.

Packaging:

  • 5-gal pails
  • CCW-702 – Product Number: 305363
  • CCW-702LV – Product Number: 316148

Shelf Life: 12 months unopened pail

Weatherbond Black and White Lap Sealant

Black & White Lap Sealants

The consistency enables it to expand and contract with membrane movement without loss of adhesion. Lap Sealants may be used to seal mechanical terminations, the cut edges of WeatherBond RBR Reinforced EPDM membranes and for sealing at splice intersections. Lap Sealant must be applied and feathered on all seam edges by the end of the working day.

Coverage Rate: 22′ per tube using a 5/16” bead.

Packaging:

  • 25 tubes/carton – Product Number: 309617 – Black
  • 25 tubes/carton – Product Number: 309819 – White

Shelf Life: 12 months

Universal Single-Ply Sealant

Universal Single-Ply Sealant

A 100%-solids, solvent-free, one-part, polyether sealant that provides a weathertight seal to a variety of building substrates. Universal Single-Ply Sealant can be used as a termination bar sealant for TPO, PVC and EPDM white adhered and mechanically attached roofing systems.

Coverage Rate: 25′ per tube or 600′ per carton using a 1/4″ bead.

Packaging:

  • 25 Tubes/carton – Product Number: 310131

Shelf Life: 12 months unopened container (@ <90°F)

Water Cut-Off Mastic

Water Cut-Off Mastic

A one-component, low-viscosity, self-wetting, butyl-blend mastic designed to be used in conjunction with roofing and waterproofing systems. It is primarily used as a sealing agent between various membranes and substrates for compression type terminations.

Coverage Rate: 10′ per tube, using a 7/16” bead.

Packaging:

  • 25 Tubes/carton – Product Number: 309830

Shelf Life: 12 months unopened container

Weathered Membrane Cleaner

Weathered Membrane Cleaner

Used to clean both new and in-service EPDM membrane and TPO membrane prior to the welding process. It helps to loosen and remove dirt and other contaminants from the surface of the membranes and leaves a suitable surface for application of adhesive or primer. Please refer to the Technical Data Bulletins for specific instructions for EPDM and TPO applications. Membrane cleaner is clear in color.

Coverage Rate: 400 square feet (one surface) per gallon.

Packaging:

  • (2) 1-gal closed-top cans – Product Number: 304066
  • 5-gal closed-top pail – Product Number: 302074
Weatherbond PVC Membrane Cleaner

PVC Membrane Cleaner

This cleaner is specially formulated to clean both new and in-service PVC membrane.

Coverage Rate: 400 square feet (one surface) per gallon.

Packaging:

  • 5-gal closed-top pail – Product Number: 308352
Cut Edge Sealant

Clear Cut Edge Sealant

TPO Cut Edge Sealant

A free-flowing polymeric material designed for sealing cut edges (exposed fabric) of TPO membrane.

Coverage Rate: 225′-275′ per 16-oz. bottle when applied with 1/8” bead.

Packaging:

  • (8) 16-oz. bottles/carton – Product Number: 303436

Shelf Life: 12 months

PVC Cut Edge Sealant

PVC Cut Edge Sealant is recommended for sealing cut edges (exposed fabric) of WeatherBond PRO PVC Membrane. Cut Edge Sealant is clear in color.

Coverage Rate: 225′-275′ per bottle when applied with 18” bead.

Packaging:

  • (12) 16-oz. bottles/carton – Product Number: 307754

Shelf life: 12 months

Weatherbond Splice Adhesive

Black Splice Adhesive

Designed for splicing cured-to-cured EPDM membranes and non-PS flashings, this high-strength, solvent-based contact cement allows quick bonding of flashing, sheeting, and cured rubber seams. Formulated for application with a 1/2″ medium nap roller and/or a 1/2″ thick paint brush, the versatile tack time allows large areas to be coated and adhered at one time.

Coverage Rate: 100 square feet per gallon.

Packaging:

  • (6) 1-gal cans – Product Number: 309550

Shelf Life: 12 months

Black One-Part Pourable Sealer

Black One-Part Pourable Sealer

A single-component, moisture-curing, elastomeric polyether sealant that is compatible with EPDM membranes. It is designed to provide a flexible, durable and long-lasting seal around hard-to-flash penetrations. The sealant’s consistency allows for quick pocket filling without mixing. Unused sealant is usable for up to 30 days if pouch is resealed with original cap. Black one-part pourable sealer is black in color.

Coverage Rate: 122 cubic inches of volume per 1/2-gal pouch.

Packaging:

  • (4) 1/2-gal pouches per bucket – Product Number: 307647

Shelf Life: 12 months unopened container

White One-Part Pourable Sealer

White One-Part Pourable Sealer

A single-component, moisture-curing, elastomeric polyether sealant that is compatible with white EPDM, TPO and PVC membranes. It is designed to provide a flexible, durable and long-lasting seal around hard-to-flash penetrations. The sealant’s consistency allows for quick pocket filling without mixing. Unused sealant is usable for up to 30 days if pouch is resealed with original cap. White one-part pourable sealer is white in color.

Coverage Rate: 122 cubic inches of volume per 1/2-gal pouch.

Packaging:

  • (4) 1/2-gal pouches per bucket – Product Number: 307603

Shelf Life: 18 months

Flashing & Accessories

Weatherbond Peel and Stick Seam Tape

Peel & Stick Seam Tape

Fully cured synthetic rubber product used for splicing cured EPDM membrane in ballasted, adhered and mechanically attached roofing systems.

Sizes Available:

  • 3″ x 100′ – Product Number: 309501 – Black
  • 3″ x 100′ – Product Number: 309817 – White
  • 3″ x 25′ – Product Number: 310364 – Black
  • 6″ x 100′ – Product Number: 326176 – Black

Quantity Per Box:

  • 4 rolls (3″ x 100′)
  • 8 rolls (3″ x 25′)
  • 2 rolls (6″ x 100′)
Peel and Stick Cured Cover Tape

Peel & Stick Cured Coverstrip

Cured EPDM membrane laminated to a synthetic rubber adhesive makes this product the optimal solution to overlay seam fastening plates, strip in seams and metal edgings, or make roof repairs.

Sizes Available:

  • 6″ x 50′ – Product Number: 310381 – Black
  • 6″ x 100′ – Product Number: 309502 – Black
  • 6″ x 100′ – Product Number: 309813 – White
  • 9″ x 100′ – Product Number: 309609 – Black
  • 9″ x 100′ – Product Number: 309814 – White
  • 12″ x 50′ – Product Number: 317597 – Black
  • 12″ x 50′ – Product Number: 317599 – White

Quantity Per Box:

  • 3 rolls (6″ x 50′)
  • 2 rolls (6″ x 100′)
  • 1 roll (9″ and 12″)
Peel and Stick Reinforced Perimeter Strip

Peel & Stick Reinforced Perimeter Strip (RPS)

Reinforced Termination Strip (RTS) combines reinforced EPDM with 3″ wide Peel & Stick tape for additional membrane securement. A 9″ version with 3″ wide Peel & Stick tape on both sides permits securement of perimeter sheeting on mechanically attached systems.

Sizes Available:

  • 6″ RPS – Product Number: 309505 – Black
  • 6″ RPS – Product Number: 309818 – White
    Use with all EPDM Systems
  • 9″ RTS – Product Number: 301945
    Use with Mechanically Attached EPDM Systems

Quantity Per Box:

  • 2 rolls (6″)
  • 1 roll (9″)
Peel and Stick Uncured EPDM Flashing

Peel & Stick Uncured EPDM Flashing

Uncured EPDM laminated to a synthetic rubber adhesive. PS Flashing can be used to flash corners, pipes and other penetrations.

Sizes Available:

  • 6″ x 100′ – Product Number: 309503 – Black
  • 6″ x 100′ – Product Number: 310434 – White
  • 9″ x 25′ – Product Number: 310461 – Black
  • 9″ x 50′ – Product Number: 309950 – White
  • 12″ x 50′ – Product Number: 309611 – Black
  • 12″ x 50′ – Product Number: 309951 – White
  • 24″ x 100′ – Product Number: 301957 – Black

Quantity Per Box:

  • 2 rolls (6″)
  • 1 roll (9″, 12″, and 24″)
Peel and Stick Curb Flashing

Peel & Stick Curb Flashing

Cured EPDM membrane cut to 20” wide width with 6″ PS Tape already applied. This product provides the most efficient way to flash curbs and short walls.

Sizes Available:

  • 20″ x 50′ – Product Number: 327532 – Black
  • 20″ x 50′ – Product Number: 309816 – White

Quantity Per Box:

  • 1 roll
Peel and Stick Cured Cover Tape

Peel & Stick Cured Cover Tape

Ideal for stripping in seams and metal edgings or simply making repairs to cut membrane.

Sizes Available:

  • 5″ x 100′ – Product Number: 322192 – Black

Quantity Per Box: 2 rolls

Peel and Stick T-Joint Covers

Peel & Stick T-Joint Covers

Semi-cured EPDM laminated to a synthetic rubber adhesive. Used to seal field splice intersections and horizontal-to-vertical transitions of field splices.

Sizes Available:

  • 6″ x 6″ – Product Number: 304029 – Black

Quantity Per Box: 20

Peel and Stick Inside/Outside Corners

Peel & Stick Inside/Outside Corners

Uncured EPDM laminated to a synthetic rubber adhesive. The pre-cut corners greatly reduce installation time and can be used for inside and outside corner installations.

Sizes Available:

  • 7″ x 9″ – Product Number: 303325 – Black
  • 7″ x 9″ – Product Number: 310310 – White

Quantity Per Box: 20

Peel and Stick Pourable Sealer Pockets

Peel & Stick Pourable Sealer Pockets

Uncured EPDM Flashing with a synthetic rubber adhesive and a 2″ support strip pre-applied to the flashing. Sizes can be combined to form larger pockets when required.

Sizes Available:

  • 4″ dia. – Product Number: 303322 – Black
  • 6″ dia. – Product Number: 303323 – Black
  • 6″ dia. – Product Number: 316243 – White
  • 8″ dia. – Product Number: 303324 – Black

Quantity Per Box: 12

Peel and Stick Pipe Seals

Peel & Stick Pipe Seals

Cured EPDM with a synthetic rubber adhesive. PS Pipe Seals increase the speed and ease of installation.

Sizes Available:

  • 1″ – 6″ – Product Number: 309991 – Black
  • 1″ – 6″ – Product Number: 317066 – White

Quantity Per Box: 10

Peel and Stick Walkway Pads

Peel & Stick Walkway Pads

Cured EPDM with a synthetic rubber adhesive. Peel & Stick Walkway Pads are designed to protect the WeatherBond EPDM membrane in areas exposed to repetitive foot traffic.

Sizes Available:

  • 30″ x 30″ – Product Number: 300829 – Black
  • 30″ x 30″ – Product Number: 309589 – White

Quantity Per Pallet: 50

Non-Reinforced Flashing

Non-Reinforced Flashing

Non-reinforced thermoplastic membrane used to field-fabricate pipe flashings and scuppers when the use of a pre-molded accessory is not feasible.

TPO

Sizes Available:

60-mil

  • 12″ x 50′ – Product Number: 300473 – White
  • 12″ x 50′ – Product Number: 300479 – Gray
  • 12″ x 50′ – Product Number: 300476 – Tan
  • 24″ x 50′ – Product Number: 300474 – White
  • 24″ x 50′ – Product Number: 300480 – Gray
  • 24″ x 50′ – Product Number: 300477 – Tan

Quantity Per Box: 1 roll

PVC

Sizes Available:

80-mil

  • 12″ x 50′ – Product Number: 323792 – White/White
  • 12″ x 50′ – Product Number: 323794 – Gray/Tan
  • 24″ x 50′ – Product Number: 323793 – White/White
  • 24″ x 50′ – Product Number: 323795 – Gray/Tan

Quantity Per Box: 1 roll

TPO Pressure-Sensitive RUSS

TPO Pressure-Sensitive Russ

10″ RUSS (shown) is used in place of narrow-width sheets to secure membrane in the perimeter of the roof on mechanically attached systems. 6″ RUSS is also available and is used to secure membrane at the base of vertical walls for additional membrane securement without penetrating the sheet.

Sizes Available:

  • 6″ x 100′ – Product Number: 303373
  • 10″ x 100′ – Product Number: 305442

Quantity Per Box:

  • 1 roll (10″)
  • 2 rolls (6″)
TPO Pressure-Sensitive Coverstrip

TPO Pressure-Sensitive Coverstrip

Non-reinforced TPO laminated to pressure-sensitive tape used for stripping in flat metal flanges such as shop-bent drip edge.

Sizes Available:

  • 6″ x 100′ – Product Number: 303102 – White
  • 6″ x 100′ – Product Number: 303103 – Gray
  • 6″ x 100′ – Product Number: 303104 – Tan

Quantity Per Box: 2 rolls

PVC Yellow Safety Warning Strip

PVC Yellow Safety Warning Strip

Reinforced PVC Yellow Warning Strip can be used on PVC to indicate roof edges or other hazards.

Sizes Available:

  • 6″ x 150′ – Product Number: 326180

Quantity Per Box: 2 rolls

Yellow PS Warning Strip

Non-reinforced TPO flashing laminated to a pressure sensitive adhesive and can be applied to EPDM or TPO systems to provide a visual warning of an impending hazard (roof edge, skylight, etc.)

Sizes Available:

  • 6″ x 100′ – Product Number: 325721

Quantity Per Box: 2 rolls

Reinforced Coverstrip

Reinforced Coverstrip

WeatherBond’s Reinforced Coverstrip is an 8″ (20.3 cm)-wide, nominal 80-mil (2.03 mm)-thick flashing that contains a polyester reinforcing fabric. Reinforced Coverstrip is used for stripping in rows of fasteners and plates and covering the butt joints of WeatherBond PRO PVC membranes.

PVC

Sizes Available:

80-mil

  • 8″ x 75′ – Product Number: 325168 – White
  • 8″ x 75′ – Product Number: 325169 – Gray
  • 8″ x 65′ – Product Number: 324046 – Tan

Quantity Per Box: 1 roll

KEE HP

Sizes Available:

60-mil

  • 8″ x 100′ – Product Number: 325981 – White

Quantity Per Box: 2 rolls

Square Tubing Wraps

Square Tubing Wraps

Fabricated using 60-mil reinforced TPO or PVC membrane and designed to flash square metal tubing. A split and overlap tab are incorporated into these parts to allow the flashings to be opened and wrapped around a square penetration with an obstruction. Additional sizes and colors available through special order.

TPO

Sizes Available:

  • 3″ x 3″ – Product Number: 305576 – White
  • 3″ x 3″ – Product Number: 307664– Gray
  • 3″ x 3″ – Product Number: 307660 – Tan
  • 4″ x 4″ – Product Number: 305577 – White
  • 4″ x 4″ – Product Number: 307665– Gray
  • 4″ x 4″ – Product Number: 307661– Tan
  • 5″ x 5″ – Product Number: 305578 – White
  • 5″ x 5″ – Product Number: 307666– Gray
  • 5″ x 5″ – Product Number: 307662 – Tan
  • 6″ x 6″ – Product Number: 305579 – White
  • 6″ x 6″ – Product Number: 307667– Gray
  • 6″ x 6″ – Product Number: 307663– Tan

Quantity Per Box: 8

PVC

Sizes Available:

  • 3″ x 3″ – Product Number: 307742 – White
  • 4″ x 4″ – Product Number: 307745 – White
  • 6″ x 6″ – Product Number: 307748 – White
  • 3″ x 3″ – Product Number: 307743 – Gray
  • 4″ x 4″ – Product Number: 307746 – Gray
  • 6″ x 6″ – Product Number: 307749 – Gray

Quantity Per Box: 8

Split Pipe Seals

Split Pipe Seals

Fabricated flashings made of 60-mil reinforced TPO or PVC membrane used for flashing pipes with an obstruction that prevents the use of a molded pipe seal. Additional sizes and colors available through special order.

TPO

Sizes Available: 

  • 1″ – Product Number: 303504 – White
  • 1″ – Product Number: 307654 – Gray
  • 1″ – Product Number: 307648 – Tan
  • 2″ – Product Number: 303505 – White
  • 2″ – Product Number: 307655 – Gray
  • 2″ – Product Number: 307649 – Tan
  • 3″ – Product Number: 303506 – White
  • 3″ – Product Number: 307656– Gray
  • 3″ – Product Number: 307650 – Tan
  • 4″ – Product Number: 303507 – White
  • 4″ – Product Number: 307657 – Gray
  • 4″ – Product Number: 307651 – Tan
  • 5″ – Product Number: 303508 – White
  • 5″ – Product Number: 307658 – Gray
  • 5″ – Product Number: 307652 – Tan
  • 6″ – Product Number: 303509 – White
  • 6″ – Product Number: 307659 – Gray
  • 6″ – Product Number: 307653 – Tan

Quantity Per Box: 8

PVC

Sizes Available:

  • 1″ – Product Number: 307724 – White
  • 1″ – Product Number: 307725 – Gray
  • 1″ – Product Number: 307726 – Tan
  • 2″ – Product Number: 307727 – White
  • 2″ – Product Number: 307728 – Gray
  • 2″ – Product Number: 307729 – Tan
  • 3″ – Product Number: 307730 – White
  • 3″ – Product Number: 307731 – Gray
  • 3″ – Product Number: 307732 – Tan
  • 4″ – Product Number: 307733 – White
  • 4″ – Product Number: 307734 – Gray
  • 4″ – Product Number: 307735 – Tan
  • 5″ – Product Number: 307736 – White
  • 5″ – Product Number: 307737 – Gray
  • 6″ – Product Number: 307739 – White
  • 6″ – Product Number: 307740 – Gray

Quantity Per Box: 8

Molded Pipe Seal

Pipe Seals

Injection-molded, pre-formed pipe flashings for pipes 3/4″ to 8″ diameter. Molded Pipe Seals provide a reliable method of waterproofing round pipe penetrations, as well as a substantial labor savings compared to field fabrication.

TPO

Sizes Available:

  • 3/4″– 8″ dia. – Product Number: 316534 – White
  • 3/4″– 8″ dia. – Product Number: 316536 – Tan
  • 3/4″– 8″ dia. – Product Number: 316535 – Gray

Quantity Per Box: 8

PVC

Sizes Available:

  • 3/4″– 8″ dia. – Product Number: 316537 – White
  • 3/4″– 8″ dia. – Product Number: 322959 – Gray
  • 3/4″– 8″ dia. – Product Number: 323823 – Tan

Quantity Per Box: 8

Molded Sealant Pockets

Molded Sealant Pockets

Interlocking, two-piece, injection-molded and weldable pockets used to waterproof pipe clusters or other oddly shaped penetrations.

TPO

Sizes Available:

  • 6″ wide x 2″ high
  • Can be adjusted from 7 1/2″ to 11 1/2″ in length
  • Product Number: 316539 – White
  • Product Number: 316540 – Gray
  • Product Number: 316541 – Tan

Quantity Per Box: 5 complete pockets

PVC

Sizes Available:

  • 6″ wide x 2″ high
  • Can be adjusted from 7 1/2″ to 11 1/2″ in length
  • Product Number: 316542 – White
  • Quantity Per Box: 5 complete pockets
TPO Curb Wrap Corners

TPO Curb Wrap Corners

Fabricated flashings made of 60-mil reinforced TPO membrane designed to reduce curb flashing time. Each corner has a 6″ wide base flange and a 12″ overall height. One curb will require 4 corners. Other sizes and colors available through special orders. Can also be ordered in 1- or 2-piece wraps.

Sizes Available:

  • 7″ Wrap for 12″ Curb – Product Number: 305062 – White
  • 13″ Wrap for 24″ Curb – Product Number: 305063 – White
  • 19″ Wrap for 36″ Curb – Product Number: 305064 – White

Quantity Per Box: 12 pieces or 3 complete curbs

Rib Profile

Rib Profile

This profile is extruded from the same weather-resistant TPO or PVC compound as the membrane. The Rib Profile is secured to the TPO or PVC roofing membrane to simulate a standing seam metal roofing system. The physical dimensional stability of the profile is enhanced with fiberglass and the rectangular profile provides exceptional shadow lines for aesthetic appeal.

TPO

Sizes Available:

  • 10′ – Product Number: 324574 – White
  • 10′ – Product Number: 324572 – Gray
  • 10′ – Product Number: 324573 – Tan

Quantity Per Box: 20

PVC

Sizes Available:

  • 10′ – Product Number: 321909 – White
  • 10′ – Product Number: 321911 – Gray
  • 10′ – Product Number: 321910 – Tan

Quantity Per Box: 20

TPO Sealant Pocket Extensions

TPO Sealant Pocket Extensions

Reinforced TPO laminated to TPO-coated metal and used to extend the lengths of the molded or prefabricated sealant pockets.

Sizes Available:

  • 2″ x 10″ – Product Number: 307769 – White

Quantity Per Box: 10

Inside Outside Corner

Inside/Outside Corners

Pre-molded and used for flashing inside and outside corners.

TPO

Sizes Available: One Size

  • Product Number: 300020 – Gray – Inside/Outside
  • Product Number: 300025 – Tan – Inside/Outside
  • Product Number: 300016 – White – Outside
  • Product Number: 307406 – White – Inside
  • Product Number: 307407 – Tan – Inside
  • Product Number: 307408 – Gray – Inside

Quantity Per Bag: 12

PVC

Sizes Available: One Size

  • Product Number: 307715 – White – Outside
  • Product Number: 307712 – White – Inside
  • Product Number: 323935 – Gray/Tan – Inside
  • Product Number: 323936 – Gray/Tan – Outside

Quantity Per Bag: 12

Walkway Rolls and Pads

Walkway Rolls and Pads

Heat-weldable walkway rolls designed to protect TPO membrane in areas exposed to repetitive foot traffic and other hazards.

TPO Walkway Rolls

Sizes Available:

  • 34″ x 50′ – Product Number: 310508 – White
  • 34″ x 50′ – Product Number: 310509 – Gray
  • 34″ x 50′ – Product Number: 310510 – Tan
  • Packaged Individually

White EPDM Peel & Stick Walkway Pads

Also Available (Not shown)

Sizes Available:

  • 30″ x 30″ – Product Number: 309589 – White

Quantity Per Pallet: 50

PVC Walkway Rolls

Also Available

Sizes Available:

  • 36″ x 60′ – Product Number: 307711 – Gray
  • Packaged Individually
T-Joint Covers

T-Joint Covers

Injection-molded non-reinforced flashings used to seal T-Joint splice intersections.

TPO

Sizes Available:

  • 4 1/2″ dia. – Product Number: 307476 – White
  • 4 1/2″ dia. – Product Number: 307477 – Tan
  • 4 1/2″ dia. – Product Number: 307478 – Gray

Quantity Per Box: 100

PVC

Sizes Available:

  • 4 1/2″ dia. – Product Number: 308224 – White
  • 4 1/2″ dia. – Product Number: 309494 – Gray
  • 4 1/2″ dia. – Product Number: 309847 – Tan

Quantity Per Box: 100

Coated Metal

Coated Metal

24-gauge (0.6 mm) galvanized steel sheet that is coated with a layer of .035″ non-reinforced flashing. Membrane may be welded directly to the coated metal. The sheet is cut to the appropriate width and used to fabricate metal drip edges or other roof perimeter edging profiles.

TPO

Sizes Available:

10 Pcs/Pallet

  • 4′ x 10′ – Product Number: 309272 – White
  • 4′ x 10′ – Product Number: 309274 – Tan
  • 4′ x 10′ – Product Number: 309273 – Gray

25 Pcs/Pallet

  • 4′ x 10′ – Product Number: 303181 – White
  • 4′ x 10′ – Product Number: 303182 – Tan
  • 4′ x 10′ – Product Number: 303183 – Gray

PVC

Sizes Available:

10 Pcs/Pallet

  • 4′ x 10′ – Product Number: 307708 – White
  • 4′ x 10′ – Product Number: 307710– Tan
  • 4′ x 10′ – Product Number: 307709 – Gray

Quantity Per Box: 100